Home / Automotive Reviews / Best Rust Converter (Review & Buyers Guide)

Best Rust Converter (Review & Buyers Guide)

/
1864 Views

Do you have rust problems with your metal items? If so, you may want to consider buying some of the best rust converter because it will help you with applying them. Existing rust becomes an issue that will affect anyone who has metal.

In fact, back before rust converters were invented, rust was an issue that no one could even do something about. It was soon, however, that they realized how rust converters had the ability to fix this issue.

After digging deeper into rust conversion products, what you learn is how you have different products available. You have to assess each one of them based on their own merits. This article will list some of the best rust converters and give you a detailed review of how these different products might be valuable.

When you go to buy a rust converter, you have a couple of different factors that you should consider.  It works because of how it converts it into a layer of magnetite, which is an oxide mineral.

It transforms the large rust flakes into a chemically inert rust converter that will basically be rust proof. Here you can find a rust converter that you could use to help with a project where rust is eating away at the metal.

Some of the places where this might be valuable include a vehicle renovation project, keeping your tools in good condition, or just keeping the rust away from your metal items. Look at each one’s distinct advantages to deciding which one to use.

Best Rust Converters For Rusty Surfaces

RankingsNamePrice and more details
#1
Corroseal Rust Converter Metal PrimerClick Here
#2
Rust Converter ULTRA, Highly Effective Professional Grade Rust RepairClick Here
#3
VHT SP229 Rust Convertor Can, Prevent Future Rust from FormingClick Here
#4
EvapoRust The Original Super Safe Rust Remover Click Here
#5
Rust Bullet RBA54 Automotive Rust Inhibitor PaintClick Here

Corroseal Water based Rust Converter Metal Primer

Corroseal rust converter and primer products

For over 25 years in some of the harshest environments, the Corroseal Water Based rust converter has been a valuable remover at the frontline of rust defense. Not all the liquid rust converters can lay claim to this same title. In particular, Corroseal 82331 has been specifically intended to be used within the marine industry.

The materials used with these rust removers are corrosive inhibitors that eliminate the rust. When it comes to packaging quality, it doesn’t necessarily look too bad, but one person did complain about how one of the jugs that they bought wasn’t the best packaged because it leaked a little.

In terms of performance, the Corroseal 82331 does a more than adequate job. If you want a gel rust converter that isn’t in spray format, this makes for a good choice because of how it is easy to clean up. However, you should read the manual carefully because once the rust kutter has been taken out of the jug, you can’t put it back in.

Important to note that if you want this chemical to work well, you will first have to clean the rusted surface because otherwise, it won’t do much. Without doing it correctly, several of the areas won’t turn black.

Does the Corroseal really work? All in all, the only time where it tended to go wrong was when someone misused these chemicals, which is obviously going to lead to other stuff. Reading the steps carefully can be helpful to avoid any issues.

Most car owners found it to be a powerful water based formula that got the job done right. Whether you have heavy to light rust on the label the Corroseal 82331 doesn’t mess around. This liquid rust converter receives the double thumbs up.

Q: Do I need protective clothing for this stuff?
A: You should use old clothing because if it gets on the skin, it will make a dark spot for up to three days. Protect yourself from an unexpected chemical reaction.

Q: How long does the rust take to come back?
A: The converting rust doesn’t come back if you use Corroseal as directed.

Pros
  • One gallon that lasts a long time
  • It tackles some of the toughest rust jobs.
  • Even a smaller jug will work for a trailer.
  • The end result looks fantastic.
  • Use to prevent further corrosion.
  • Easy to clean up water based rust removers.
Cons
  • The high cost might scare away some buyers.
  • Read the instructions and don’t pour more than you think you need.

Rust Converter ULTRA – The Best Surface Rust Reformer

Ultra Rust converter Oil Based Products

You might call the Rust Converter Ultra the ideal surface conditioner. The primer will change the rust into what looks like a dark protective polymeric coating. Use it to seal out the moisture so that future rust will be prevented.

This makes for the ideal choice for oil-based paints because it resists the effects without peeling or cracking. Important to remember that before you begin, you will need to have a paint to use afterward because you will need to spray over it.

In terms of performance, the Rust Converter ULTRA is outstanding for cleaning everything up. It will give you long-lasting protection on metals, but you should seal the primed and paintable surface with two coats of an oilbased paint for lasting protection.

You will also need to use this liquid rust converter at specific temperatures for it to be the most successful. You want it to be around 60 degrees out and no higher than 100 degrees out.

Unfortunately, it will only slow down rust, but it won’t eliminate the rust, which means this can’t be advised for everyone in the market.

This is good for removing the rust away or preventing it from getting worse, but it won’t take care of a problem that is already out of control. For that, you will probably be better off with the Corroseal 82331.

Pros
  • This 1 gallon does what it says it will do.
  • This is a good rust converter for painting over after.
  • The application is simple for a quick result.
  • Helps with knocking off the loose paint and the chips of rust.
Cons
  • It won’t free you completely of rust.
  • Some complains that it didn’t do much.

VHT SP229 Rust Converter Can

VHT Rust converter

One of the unique spray bottles that have been designed for direct spraying onto the rusted areas, VHT SP229 aerosol rust converter, stops the rust from coming back or getting worse. When you go to spray it on, it starts out as clear, but it will turn into a black metal coating that prevents rust from ever becoming a problem.

This liquid rust converter has been specifically intended for body filler, and metal. The rust converter sprays will sand into a smooth finish, but you should allow it to dry for 24 hours.

After a couple of days, the rust on the vehicle appears to vanish, which is quite impressive. Anyone who owns a car may want to add this to their toolkit because it offers you a basic solution that works. Some people can’t believe that they had never heard of it before.

You have to keep in mind is that you must prepare the smooth surface and clean it before you decide to use this. You will complete the instructions and cure the information. After you have done this, you will clean the rusted metal with a solvent.

The fact that it comes packaged in a spray bottle can is awesome because you can use it quite easily in comparison to if it came in a jug. One of the issues that some people seemed to have with it was how it didn’t seem to go as far as what they had hoped that it would.

On the list of products, these aerosol spray cans are probably the least popular of the choices. Sure, it doesn’t cost as much as the other two, but it also doesn’t cover as much surface as what the other two could do.

This convenient spray bottle can be used for preventative maintenance. If you require a smaller application, this might be an okay spray, but if you require something to use with a rusty trailer, the Corroseal 82331 will do better than others.

You are looking for a rust converter that you can spray with easy? If so, this a fantastic choice. Formulated to destroy rust on all application equipment, it’s easy to spray. In fact, you can apply by spraying or with a brush.

Within minutes of application, rust will disappear. The rust converter reacts with rust to generate a black polymer coating. This tough inert coating acts as a protective barrier. What you need to know is that the topcoat is specially formulated for use with fiberglass.

Q: What’s the consistency, and will it run before drying?
A: This is a thin liquid, and you will want to wait two minutes between each coat.

Q: Does this work on tools like rakes and shovels?
A: It causes a chemical reaction with the rust to create a new chemical compound.

Pros
  • The low cost converter sprays are fenomenal
  • Converts the rust into a solid form of metal
  • The rust appears to vanish after a few days
  • Prevents further rust formation
Cons
  • It doesn’t cover as much as what you’d hope for.
  • More effective to stick with spraying over the brush.
  • Some complains about the nozzle breaking off.

EvapoRust The Original Super Safe Rust Remover<

EvapoRust Rust Converter product with no acid

With some rust converters, you have to exercise a lot of caution and wear goggles to protect yourself. With the Evapo-Rust ER012, you have a slightly different gallon than what you’d get with some of the others.

This one has no fumes, it’s non-toxic, safe on the skin and it doesn’t contain any acids. EvapoRust was originally developed as a chemical for the US military to help with replacing the dangerous acids. It will also remove anywhere from four to five times the amount of rust from some of the other water-based rust converters for trucks.

What’s so distinct about the performance of EvapoRust ER012 is how you don’t have to concern as much about using it. It’s environmentally friendly, and at the same time, it is one of the less dangerous products to use. It helps with eliminating a lot of the rust.

However, isn’t perfect. If you have something that’s heavily rusted, it will remove about 60 percent of the rust on it. The ratings for this topcoat were quite impressive. It is as thin like water, but some users have said that if it had been thicker, it might have worked better.

Q: What happens when you can’t soak it?
A: It will still work even if you can’t use a lot of it. You use a rag that has been soaked and pour it onto the area of rust. You let it sit and occasionally rub the surface again so that it will improve it.

Pros
  • An excellent middle ground in price.
  • It is environmentally friendly.
  • You don’t have to worry about
  • Eliminates the use of dangerous acids.
  • Safe for the skin and eyes.
Cons
  • It doesn’t completely eliminate all the rust.
  • It takes a time of soaking before it removes any rust.

Rust Bullet RBA54 Automotive Rust Inhibitor Paint

Rust Bullet Rust Converter

What’s amazing about this gallon is how you can spray it easily with a unique one-step process. In fact, it has two patents from the United States, and you don’t have to spray a top coat, and you don’t need a roll, brush, or spray it.

The process is simple, and you don’t have to worry about much about preparation like you would with some of the other products either. It should also be mentioned that this coat is UV resistant to rust. It will never crack or fade over time from it.

It makes use out of an automotive formula, and it has more metal with a little thinner than what you might get with their standard formula for some of the other products.

A smoother finish will usually be desired, especially for some of the automotive projects that you might have. You could also make use out of this as a stand-alone protective coating, but you will need a minimum of two coats for this to work its best.

One thing to understand with the Rust Bullet is how you shouldn’t spray it during the sweltering heat because of how it will be a little less effective.

If you’re going to use this topcoat, then you should open it and start using it right away because it had a tendency of bonding the metal lid to the rest of it, so you wanted to use it immediately.

The actual shelf-life of this prime is quite small, and considering how much you pay for it, not everyone will want to get involved with a product that costs so much while being rendered useless shortly after.

Q: Will this kit be enough for the underpart of a vehicle?
A: It will cover around 100 feet of surface, and you will need a minimum of two coats applied for it to work.

Q: How long after the application until you can expose the paint to water?
The full curing time for this prime sprayed will be at around 72 hours in total, which isn’t the fastest on the list.

Pros
  • Holds to US patents
  • Resistant to ultraviolet rays so that the work doesn’t face.
  • Excellent for projects like restoring a rusty old car.
Cons
  • The cost is double that of the second most expensive prime spray.
  • The lid was sometimes impossible for some to take it off.

POR-15 45404 – Best for Truck Frame Rust Repair

POR-15 Rust Converter spray or brush products

When you look at POR-15, you have a perfect high-tech performance rust converter that prevents rust from forming, and you can spray this directly to the rusted metal and seasoned metal surface.

What the POR-15 product will do for you is to prevent the rust from occurring again, and you can stop it from experiencing further exposure to the moisture. It has been designed for direct application on any rusted surface, and it dries at an incredible rate.

The best part is how this isn’t a finish that cracks or peels. Overall, this product performed quite well in taking care of the rust issues. In fact, it’s a great preventative measure in keeping the rust away.

You should, however, be sure that you follow the directions and make sure that you only use this in an area that has been well ventilated. You might even want a fan because of how this can blow away some of the strong odor.

One of the biggest issues that users highlighted was with the can itself. Getting the lid off could be tricky, and some experts had problems with it. Another thing that you should always keep in mind is to use old clothing, and goggles.

Whatever this product touches, it will stain it. That will be a big problem for you if you’re not prepared. Another one of the big problems with this product is how it will not hold up against the ultraviolet rays, so you will need to cover the top part of it with a top coat of paint.

According to some reviews, this automotive rust converter is worth every dollar. In general, you have a fairly reasonable rating across the board because of how it protects your metal from rusting. One of the great benefits about this can is how it comes to getting rid of the rust.

Q: If I paint this over rust, will it stop the rust from spreading?
A: In most cases, yes, you will stop the rust from spreading after you have painted this over the rust. However, you should be sure to follow the directions to get the best results possible.

Q: How much square footage will this cover in a quart?
A: A quart of POR-15 covers around 50 square feet with two separate coats.

Pros
  • It gets rid of rust and rust prevention in the future.
  • The finish won’t crack or peel.
  • A lower price makes this a bargain.
  • You can choose to brush it or spray it.
Cons
  • Won’t hold up against the ultraviolet rays of the sun.
  • This product will stain anything it touches.
  • You need to wear goggles because the vapors can irritate your eyes.

Loctite 75430 Extend Rust Treatment

Loctite Rust Converter eliminate corrosion formula

With this product, you get a one-step treatment that is effective, and you will destroy some of the old rust on metal. In addition, it has become popular because of how it does not allow new rust from forming. With this product, you have the choice to either brush it on or spray the product on.

It will work within minutes, and the rust disappears because it gets converted over into this black and protective coating. The Loctite 75430 product has been formulated to work with fiberglass and body filler, especially. In terms of packaging, this product comes in a plastic container.

Mechanics have sometimes praised this product because of how it can be used in conjunction with repairs to hold up for long periods. In general, it performs quite well, and it will turn the rust into black looking metal. You can always spray paint over this will make it look better.

Be caution when you go to use this product. However, you should first put on some latex gloves when you go to use it because of how this product has been known to stay your hands black if you don’t.

Another problem is how it can be quite difficult to get off your hands after the fact. This product will protect your equipment if you live in a humid environment.

This was one product that received praise across the board. You only had a few applicants who had rated it down with negative ratings. It does have a few problems, but if you look at any of the other products on this list, each of them will have their positives and negatives.

This is a great product for getting rid of rust, and it’s a unique product for helping to prevent future rust as well. Loctite 75430 has a loyal fan following, and you will find a lot of experts saying how they have used it for years.

Q: Can this be used on a kitchen stove?
A: This isn’t a good idea because of how once the aquas portion of the product has evaporated, the remaining byproduct can be toxic, and this is where you prepare food.

Q: Is there a solvent that can be used to thin it down?
A: Unfortunately, there’s no chemical that can be used for thinning down this product.

Pros
  • One simple step to eliminate rust completely
  • Destroys some of the older rust and prevents future rust
  • It helps the repairs on vechiles to last much longer
  • Use it after you have sanded the rust a little first
Cons
  • You will want to wear latex gloves to avoid staining on the hands
  • Once it’s on your hands, it can be difficult to take off

MROChem Black Star Rust Converter

MRO chem black star with polymer resin rust treatment

The MROChem Black Star Rust Converter stops rusts in its tracks. Thanks to its advanced formula, the product converts rust into a slick polymer resin coating. The polymer resin coating is rustproof.

This means your car or metal equipment will have protection from rust. The MRO Chem Black Star Rust Converter not only works as a rust converter but as a primer too. This prepares the metal surface for painting.

Applying the rust converter is easy. You can spray, brush, or use a roller. Regardless of the application method, the rust converter will improve the integrity of your metal. You no longer have to concern about sandblasting or grinding.

Pros
  • Easy for fixing rust on trucks
  • Has unlimited uses and battles agaist further corrosion
  • Transforms rust into a polymer resin coating
  • Prevents future corrosion
Cons
  • You have to buy the air gun
  • Requires more than one application
  • Leaves stubborn stains on other surface

Gemplers Ecofriendly RCQ Rust Converter

Gemplers ecofriendly rcq with iron oxide primer products

Want to restore your old machine with ease? The GEMPLER Rust Converter is a convertor and primer. As such, it stops rust right in its tracks. You can use it on metal tools, vehicles, or anything with rusted steel surface.

It turns into a highly effective primer making it easy for you to paint over the surface. The RCQ rust converter is easy to apply and offers wide coverage.

Before applying, use a wire brush to remove the layered rust. Spread the rust converter with a paintbrush. You can also use a sponge. The rust converter is environmentally safe and non-flammable.

As one of the best solutions for removing rust on metal surfaces, GEMPLER Rust Converter eliminates costly sandblasting. It chemically penetrates and converts rust into magnetite. This substance does not react with oxygen and moisture.

What you ought to know is that the rust converter primes the metal surface with a high-quality primer. This primes the metal surfaces for oil coatings. It’s ideal for metal structures and equipment. They include vehicles, farming, construction, and industrial machinery.

Pros
  • Eco-friendly
  • Easy to apply
  • Offers wide coverage
  • One quart covers 125 square feet
Cons
  • The product must be kept above the freezing point.

TotalBoat Rust Neutralizer

Effective professional grade rust repair

The TotalBoat Rust Primer Converter is a phosphoric acid-based rust converter. It converts rust into an inert substance. Ideal for cars, trucks, boat trailers, bikes, and steel doors, it protects and preserves the metal surface.

TotalBoat Rust Primer Converter is suitable for new metal surfaces. This ensures maximum paint adhesion. To apply, use an air gun or brush. Compared to similar products, the product offers excellent coverage.

In fact, it covers 500 square feet per gallon. After the application, it takes 15 to 20 minutes. Since its a phosphoric acid-based rust converter, wear protective clothing, protective eyewear, and mask before using.

Pros
  • Offers superior performance
  • Use on rusted on trucks, cars, boat trailers and bikes
  • It takes 15 to 20 minutes to dry
Cons
  • May leave a sheen on surrounding metal.

Best Rust Converter Buyers Guide

permatex 8184912pk rust remover
Let’s face it. You don’t want to buy a prime convertor that does not meet your needs. In our buying guide, we offer information on what a rust converter is, what to consider, and more.

Do you have to paint over the coverter? Well, you don’t have to, but you can do so to give the application equipment a nice finish. If you used a wire brush to remove rust particles, sand the area to ensure its smooth and free of defects before painting.

It is advisable to sand with 80 grit and 120 grit. By doing so, you make it easier for you to spread the oil-based paint.

What Is a Rust Converter?

This is a water-based primer applied directly onto iron surfaces. Applying rust converter on iron turns the rust into a protective polymeric coating. The coat acts as an excellent primer for epoxy and oil-based paints.

A rust converter for truck frames contains two active ingredients. They include organic polymer and tannic acid. Tannic acid reacts with rust to form iron tannate, while the organic polymer forms a protective primer layer.

How to Apply the Rust Killer To Convert Rust

First, you must know is that rust converters do not remove rust. They react with it, forming a protective barrier called magnetite. To lay on a rust converter, consider the following.

  • Materials Needed: Before starting, you need the right materials. Try a rust converter in aerosol form. Its application is easy and perfect for both small and large surfaces. You may choose a liquid form when you remove rust converter. If you do so, shop for a reputable brand. Avoid powders to prevent inhaling.
  • Wire brush: A wire brush allows you to remove large rust and scale particles and not to remove all the rust. Why? It defeats the purpose of using a rust converter.
  • Soap and water: Soap and water allow you to clean up the rust converter from the application equipment. Remember, the water should be hot for effective results. There are rust converters that require specialized detergents. Always go for brands that say easy to clean.

Rust Encapsulator vs. Rust Convertor

It’s very easy to confuse between a rust encapsulator and a rust converter. Rust encapsulators can prevent rust from forming or spreading. Apply only on light to medium rust formation.

What you need to know is that it does not change rust into any substance. Rust converters react with rust to form magnetite. Best used on medium to heavy rust formation. On painted or bare metal surfaces, it works poorly.

Wrapping Up

As said earlier, rust on your car parts and frame compromise your safety and that of your passengers. It also compromises the safety of other motorists. To avoid accidents in the future, you must take preventative measures now. Never paint over rust without applying rust converter first.

Choose rust converting primers that can be safe, and offer a convenient drying time. What you need to know is that the same brand will not work for everybody, especially for concrete driveways.

For the best rust converters, start with the products that are nonflammable and noncorrosive. Also, read verified customer reviews for more references. Other brands like the RustZilla rust converter and the FDC rust converter ultra might be other options to explore.

Best of luck!

This div height required for enabling the sticky sidebar