Best Rust Converter – review and buyer’s guide

Best Rust Converter – review and buyer’s guide

Do you have rust problems with your metal items? If so, you may want to consider buying some of the best rust converters because it will help you with applying them. Rust becomes a problem that will affect anyone who has metal items. In fact, back before rust converters were invented, rust was a problem that no one could even do something about. It was soon, however, that they realized how rust conversion products had the ability to fix this issue.

After digging deeper into rust conversion products, what you learn is how you have different products available. You have to assess each one of them based on their own merits. This article will list some of the best rust converters and give you a detailed review on how these different products might be able to help you and how they will be valuable.

Buyer’s Guide on the Best Rust Converters

When you go to buy the best rust converter, you have a couple of different factors that you should consider. Instead of removing the rust, this kind of product will convert the product. It works because of how it converts it into a layer of magnetite, which is a black iron oxide mineral. It transforms the rust into a chemically inert product that will basically be rust proof.

Corroseal 82331 – Best rust converter on market

For over 25 years in some of the harshest environments, Corroseal 82331 has been a valuable product at the frontline of rust defense. Not all the rust converters can lay claim to this same title. In particular, Corroseal 82331 has been specifically intended to help you use it within the marine industry. Some of the areas that you could use it in this industry include:

  • Ships
  • Bridges
  • Oar locks
  • Shipping containers
  • Decks and railings

The materials used in this product are corrosive inhibitors that help to eliminate the rust. In terms of packaging quality, it doesn’t necessarily look too bad, but one person did complain about how one of the jugs that they bought wasn’t the best packaged because it leaked a little.

Performance and Technical Issues

In terms of performance, the Corroseal 82331 does a more than adequate job. If you want a rust converter that isn’t in spray form, this makes for a good choice because of how it is easy to clean up. However, you should read the instructions carefully because once the product has been taken out of the jug, you can’t put it back in.

Important to note that if you want this product to work well, you will first have to clean the surface because otherwise, it won’t do as good of a job. Without doing it correctly, several of the areas won’t turn black.

Recommended or Not?

Does Corroseal works? All in all, the reviews for this product were astoundingly good. The only time where it tended to go wrong was when someone misused the product, which is obviously going to lead to problems. Reading the instructions carefully can help to avoid this problem. Most people found it to be a powerful rust converter that got the job done right. Whether you have heavy to light rust on the product, the Corroseal 82331 doesn’t mess around. This product receives the double thumbs up.

Pros

  • It tackles some of the toughest rust jobs.
  • Even a smaller jug will work for a trailer.
  • The end result looks fantastic.
  • You can apply it quite easily.
  • Easy to clean up

Cons

  • The high cost might scare away some buyers.
  • Read the instructions and don’t pour more than you think you need.
  • This product doesn’t do good in heat, and it will bubble.

FAQ for the Product

Q: Do I need protective clothing for this stuff?
A: You should wear gloves and old clothing because if it gets on the skin, it will make a dark spot for up to three days.

Q: How long does the rust take to come back?
A: The rust doesn’t come back if you use Corroseal as directed.

Check price and availability on Amazon

Rust Converter ULTRA – The Best Choice for Oil-Based Paints

You might call the Rust Converter Ultra the ideal surface conditioner. The primer will change the rust into what looks like a dark protective polymeric coating. It helps to seal out the moisture so that future rust will be prevented. This makes for the ideal choice for oil-based paints because it resists the effects without peeling or cracking.

Performance and Technical Issues

Important to remember that before you begin, you will need to have a paint to use afterward because you will need to paint over it. In terms of performance, the Rust Converter ULTRA does a great job of cleaning things up. It will give you long-lasting protection on the iron surfaces, but you should seal the surface with two coats of an oil-based paint for lasting protection.

Recommended or Not?

In general, most of the reviews were positive for the Rust Converter Ultra. You will also need to use this product at specific temperatures for it to be the most successful. You want it to be around 60 degrees out and no higher than 100 degrees out. This product, unfortunately, will only slow down rust, but it won’t eliminate the rust, which means this can’t be recommended for everyone in the market. This is great for keeping the rust away or keeping the problem from getting worse, but it won’t take care of a problem that is already out of control. For that, you will probably be better off with the Corroseal 82331.

Pros

  • The product does what it says it will do.
  • This is a good rust converter for painting over after.
  • The application is simple for a quick result.
  • Helps with knocking off the loose paint and the chips of rust.

Cons

  • It won’t free you completely of rust.
  • This product costs a lot.
  • Some people complained that it didn’t do the job that it should have.

FAQ for the Product

Q: What paint do I need to cover the metal?
A: The best paint for covering the metal will be an oil-based paint, but you can use any paint if needed.

Q: What’s the effect if it touches bare metal?
A: This product will have no effect on bare metal because it only affects the rust.

Check price and availability on Amazon

VHT SP229 Rust Convertor Can – The Best Product for Spraying

One of the unique products that have been designed for direct spraying onto the rusted areas, VHT SP229 stops the rust from coming back or getting worse. When you go to spray it on, it starts out as clear, but it will turn into a black metal coating that prevents future rust from ever becoming a problem. This product has been specifically intended for body filler, metal and fiberglass. The rust converter will sand into a smooth finish, but you should allow it to dry for 24 hours.

Performance and Technical Issues

After a couple days, the rust on the vehicle appears to vanish, which is quite impressive. Anyone who owns a car may want to add this to their toolkit because it offers you a basic solution that works. Some people can’t believe that they had never heard of it before.

One thing that you have to keep in mind is that you need to prepare the surface and clean it before you decide to use this. You will complete the instructions and cure the information. After you have done this, you will clean the metal with a solvent. The fact that it comes packaged in a spray can is great because you can use it quite easily in comparison to if it came in a jug. One of the problems that some people seemed to have with it was how it didn’t seem to go as far as what they had hoped that it would.

Recommended or Not

On the list of recommended products, this is probably the least recommended of the choices. Sure, it doesn’t cost as much as the other two, but it also doesn’t cover as much surface as what the other two could do. What this product can help with is preventative maintenance. If you have a need for a smaller application, this might be an okay product, but if you need something to help with a rusty trailer, the Corroseal 82331 will do a better job.

Pros

  • The low cost is great.
  • Converts the rust into a solid form of metal.
  • The rust appears to vanish after a few days.
  • Helps the metal product to look brand new.

Cons

  • It doesn’t covers as much as what you’d hope for.
  • More effective to stick with spraying over the brush.
  • The product only covers over rust instead of converting it.
  • Some people have complained about the nozzle breaking off.

FAQs for this Product

Q: What’s the consistency and will it run before drying?
A: This is a thin liquid, and you will want to wait two minutes in between each coat.

Q: Does this work on tools like rakes and shovels?
A: It works fine because it chemically reacts with the rust to form a new chemical compound.

Check price and availability on Amazon

Evapo-Rust ER012Best rust converter for cars

With some rust converters, you have to exercise a lot of caution and wear gloves and goggles to protect yourself. With the Evapo-Rust ER012, you have a slightly different product than what you’d get with some of the others. This one has no fumes, it’s non-toxic, safe on the skin and it doesn’t contain any acids. Evapo-Rust was originally developed as a product for the US military to help with replacing the dangerous acids. This product will also remove anywhere from four to five times the amount of rust from some of the other water-based rust converters.

Performance and Issues

What’s great about the performance of Evapo-Rust ER012 is how you don’t have to worry as much about using it. It’s environmentally friendly, and at the same time, it works great for being one of the less dangerous products to use. It helps with eliminating a lot of the rust.

This product, however, isn’t perfect. If you have something that’s heavily rusted, it will remove about 60 percent of the rust on it. In general, the reviews for this product were quite good. This product is as thin as water, but some people have said that if it had been thicker, it might have worked better. In addition, some people complained how the product barely removed any rust.

Pros

  • Good middle ground in price.
  • This product is environmentally friendly.
  • You don’t have to worry about
  • Eliminates the use of dangerous acids.
  • Safe for the skin and eyes.
  • Largely positive reviews on this product.

Cons

  • It doesn’t completely eliminate all the rust.
  • The product hasn’t always met the goals of the customers.
  • Takes a long time of soaking before it removes any rust.

FAQs for this Product

Q: Will this product make the metal more prone to rusting?
A: In a humid environment, any metal will be prone to rusting. One of the simple solutions after using Evapo-Rust is to paint over the metal to protect it.

Q: A lot of methods seem to involve soaking with this product. What happens when you can’t soak it?
A: This product will still work even if you can’t soak the product. You use a rag that has been soaked and pour it onto the area of rust. You let it sit and occasionally rub the surface again so that it will help to improve the surface.

Check price and availability on Amazon

Rust Bullet RBA54 Automotive Rust Inhibitor Paint – Best rust converter for car body

What’s great about this product is how you can apply it easily with a unique one-step process. In fact, this product has two patents from the United States, and you don’t have to apply a topcoat, and you don’t need a roll, brush or to spray it. The process works simply, and you don’t have to worry about much about preparation like you would with some of the other products either. It should also be mentioned that this product is UV resistant to rust. It will never crack or fade over time from it.

Performance and Issues

This product makes use out of an automotive formula, and it has more metal with a little thinner than what you might get with their standard formula for some of the other products. A smoother finish will usually be desired especially for some of the automotive projects that you might have. You could also make use out of this as a stand-alone protective coating, but you will need a minimum of two coats for this to work its best.

One thing to understand with the Rust Bullet is how you shouldn’t apply it during the sweltering heat because of how it will be a little less effective. If you’re going to use this product, then you should open it and start using it right away because it had a tendency of bonding the metal lid to the rest of it, so you wanted to use it immediately. The actual shelf-life of this product is quite small, and considering how much you pay for it, not everyone will want to get involved with a product that costs so much while being rendered useless shortly after.

Pros

  • Holds to US patents
  • You can apply this product easily.
  • Resistant to ultraviolet rays so that the work doesn’t face.
  • This is a low maintenance product that stops rust dead in its tracks.
  • Great for projects like restoring a rusty old car.

Cons

  • The cost is double that of the second most expensive product on this list, the Corroseal 82331.
  • The lid was sometimes impossible for some people to take it off.

FAQs for This Product

Q: Will this kit be enough for the underpart of a truck?
A: This product will cover around 100 feet of surface, and you will need a minimum of two coats applied for it to work.

Q: How long after the application until you can expose the paint to water?
The full recommended curing time for this product will be at around 72 hours in total, which isn’t the fastest on the list.

Check price and availability on Amazon

POR-15 45404 – Best for truck frame

When you look at POR-15, you have a perfect high-tech performance rust converter that does a fantastic job of preventing future rust, and you can apply this directly to the rusted and seasoned metal surfaces. What this product will do for you is to prevent the rust from occurring again, and you can stop it from experiencing further exposure to the moisture. This product is quite flexible, and it works well. The product has been designed for direct application on the rusted surfaces, and it dries at an incredible rate. The best part is how this isn’t a finish that cracks or peels.

Performance and Technical Issues

In general, this product performed quite well for taking care of the rust issues. In fact, it’s a great preventative measure in keeping the rust away. You should, however, be sure that you follow the directions and make sure that you only use this in an area that has been well ventilated. You might even want a fan because of how this can blow away some of the strong odor.

One of the biggest problems that users highlighted was with the can itself. Getting the lid off could be tricky and some people had problems with it. Another thing that you should always keep in mind is to use gloves, old clothing and goggles. Whatever this product touches, it will stain it. That will be a big problem for you if you’re not prepared. Another one of the big problems with this product is how it will not hold up against the ultraviolet rays, so you will need to cover the top part of it with a coat of paint.

Recommended or Not?

As some people who have reviewed it said, this automotive rust converter is worth every dollar. In general, you have a fairly reasonable rating across the board because of how it protects your metal from rusting. One of the great things about this can is how it comes with plenty of help in getting rid of the rust.

Pros

  • It gets rid of the rust.
  • The finish won’t crack or peel.
  • A lower price makes this a good bargain.
  • You can choose to brush it or spray it.

Cons

  • Won’t hold up against the ultraviolet rays of the sun.
  • This product will stain anything it touches.
  • You need to wear goggles because the vapors can irritate your eyes. Also, make sure you do this in a well-ventilated area.

FAQs About This Product

Q: If I paint this over rust, will it stop the rust from spreading?
A: In most cases, yes, you will stop the rust from spreading after you have painted this over the rust. However, you should be sure to follow the directions to get the best results possible.

Q: How much square footage will this cover in a quart?
A: A quart of POR-15 covers around 50 square feet with two separate coats.

Check price and availability on Amazon

Loctite 75430 Extend Rust Treatment – The Fastest Dryer

With this product, you get a one-step treatment that works great, and you will destroy some of the old rust on metal. In addition, it has become popular because of how it prevents new rust from forming. With this product, you have the choice to either brush it on or spray the product on. It will work within minutes, and the rust disappears because it gets converted over into this black and protective coating. This product has been formulated to especially work with fiberglass and body filler. In terms of packaging, this product comes in a plastic container that seems to the job.

Performance and Technical Issues

Mechanics have sometimes praised this product because of how it can be used in conjunction with repairs to help them hold up for even longer. In general, it performs quite well, and it will turn the rust into a black looking metal. You can always paint over this to help it look better.

One word of caution when you go to use this product, however. You should first put on some latex gloves when you go to use it because of how this product has been known to stay your hands black if you don’t. Another problem is how it can be quite difficult to get off your hands after the fact. Especially if you happen to live in a humid environment, this product will protect your equipment better.

Recommended or Not?

This was one product that received praise across the board. You only had a few people who had rated it down with negative ratings. It does have a few problems, but if you look at any of the other products on this list, each of them will have their positives and negatives. This is a great product for getting rid of rust, and it’s a good product for helping to prevent future rust as well. Loctite 75430 has a loyal fan following, and you will find a lot of people saying how they have used it for years.

Pros

  • This is a one-step treatment program.
  • Destroys some of the older rust and prevents future rust.
  • This product works within minutes—not hours!
  • Helps the repairs on cars to last much longer.
  • Works especially well if you have sanded the rust a little first.

Cons

  • You will want to wear latex gloves to avoid staining on the hands.
  • Once it’s on your hands, it can be difficult to take off.

FAQs About the Product

Q: Can this be used on a kitchen stove?
A: This isn’t a good idea because of how once the aquas portion of the product has evaporated, the remaining byproduct can be toxic, and this is where you prepare food.

Q: Is there a recommended solvent that can be used to thin it down?
A: Unfortunately, there’s no chemical that can be used for thinning down this product.

Check price and availability on Amazon

Here are some of the best rust converters that you could use to help with a project where rust is eating away at the metal. Some of the places where this might be valuable include a vehicle renovation project, keeping your tools in good condition or just keeping the rust away from your metal items. Look at each one’s distinct advantages to decide which one to use.